Agents

Preliminary softening agent 
GMP-Softener

• for softening hard grease pollution, excellent for backed bearing oil on electric motors windings;
• being a little gelled is very useful for cleaning vertical surfaces

Characteristic:

• amber coloured thick liquid;
• density 0.84 g/cm3;
• ignition point 60^oC;
• at 20^oC wash away with GMP-Cleaner after 5 – 20 minutes. In lower temperatures this time is longer and in higher temp is shorter.

Main cleaning liquid 
GMP-Cleaner

• excellent for cleaning grease pollution using high pressure spraying or diving technology;
• perfect dielectric strength and high ignition point makes work safe for workers;
• soft chemical action and almost 100% evaporation makes cleaning windings and switch-gears full of safe.

Characteristic:

• supply: transparent non coloured liquide;
• electrical strength over 209000.0 V/cm;
• self ignition point over 230^oC;
• ignition point over 61^oC;
• density 0.785 g/cm3 at 15^oC.

• for protection windings against moisture and water;
• excellent for displacing moister from wet windings and coils;
• high work temperature;
• owing to plasticity consistence has great resistance against dilatation stresses of heating windings.

Characteristic:

• work temperature 180^oC;
• dielectric strength 40kV/cm;
• ignition point in liquid state 65^oC;
• self ignition point in liquid state 260^oC;
• density 0.914 g/cm3;
• minimal voltage of impregnated contact gears 6 V [RMS].

Cleaning equipment

Electrical Spray gun GMP450SE

• excellent for spraying GMP-Softener and GMP-Impregnator 
• very useful for painting different kind of enamels and varnishes.

Characteristic:

• supply: 230 V, 50 Hz;
• delivery about 20-350 g/min;
• 4 electronic spray gears and mechanical delivery regulator;
• Equipment: 3 nozzles: one for cleaning, one long flexible for spraying in closed chambers, one nozzle Ř 0,8 mm for painting different density paints;
• water and dissolving resistance;

Cleaning pomp GMP260

Application:  

• for cleaning electrical devices as windings, coils, switch boxes, group of wires (f.ex. under turbine set)
• for spraying different enamels and varnishes.

Characteristic:

• regulated pressure from 0 to 205 bars;
• delivery about 1,1 litre/1min at 140 bars;
• supply: 230V, 50Hz;
• Equipment: cleaning nozzle with regulation from sharp to dispersal shape of stream, 7,5 m long armoured hose, spray gun, manometer, filter, suction hose, painting nozzle,
• water and dissolving resistance;
• all on useful trolley with 10 litre can fixing